Explanation of terms - Glossary from A to Z

NIJ Standard 0101.07: Protection Levels, Testing Methods, and Key Changes

NIJ Standard 0101.07 is the current U.S. testing standard for certain types of ballistic-resistant body armor. It establishes minimum performance requirements and test methods for armor systems designed to protect the torso against specified handgun and rifle threats. Unlike its predecessor, NIJ 0101.06, the new standard defines ballistic protection levels and test threats in a separate document, NIJ Standard 0123.00. The updated classification system includes two handgun protection levels, HG1 and HG2, and three rifle protection levels, RF1, RF2, and RF3. 

What Does NIJ Standard 0101.07 Cover? 

NIJ Standard 0101.07, titled "Ballistic Resistance of Body Armor," specifies how body armor is tested and which performance requirements it must meet. 

These requirements include test sample conditioning, ballistic testing, penetration resistance, and permissible backface deformation. 

The standard distinguishes between three types of body armor: 

  • Soft Armor: Flexible ballistic protection systems designed to meet handgun threat levels HG1 and HG2. 

  • Stand-Alone Hard Armor: Rigid armor plates designed to achieve their specified protection level without an additional soft armor panel. 

  • In-Conjunction-With (ICW) Hard Armor: Hard armor plates that achieve their specified protection level only when combined with a designated soft armor system. 


NIJ 0101.07 applies to certain types of torso-worn body armor. Helmets, shields, vehicle armor, and aircraft protection systems are outside its scope. 

 

Protection Levels

What Protection Levels Are Defined Under NIJ 0101.07?

The protection levels associated with NIJ 0101.07 are specified in NIJ Standard 0123.00.

undefined

What Does the New NIJ RF2 Protection Level Mean? 

NIJ RF2 introduces an additional rifle threat profile. To meet RF2 requirements, a body armor system must withstand not only the specified 5.56 mm M855 threat but also all RF1 test threats. 

For manufacturers, this means the complete armor system must be designed and tested against multiple defined projectiles. Compliance cannot be established based on performance against a single type of ammunition.

What Changed from NIJ 0101.06 to NIJ 0101.07? 

The revision goes beyond renaming the protection levels. Key changes include: 

 

  • Updated standard structure: NIJ 0101.07 establishes performance requirements and test methods, while NIJ 0123.00 specifies protection levels and test threats. 
  • Expanded rifle threat profiles: RF1 includes multiple test projectiles. The new RF2 level adds 5.56 mm M855 to those requirements. 
  • Standardized testing procedures: NIJ 0101.07 makes greater use of ASTM test methods, including procedures for armor conditioning and ballistic testing. 
  • Improved testing of complex geometries: Nonplanar soft armor systems and curved hard armor plates receive more detailed consideration. This includes additional requirements for crown locations, or specific high points on curved armor plates. 
  • Evaluation of backface effects: In addition to penetration resistance, the standard evaluates backface deformation (BFD), which describes deformation on the rear surface of the armor system during projectile impact. 


The central requirement remains the demonstrated performance of the complete armor system under specified test conditions. 

Is NIJ 0101.06 Still Valid? 

NIJ Standards 0101.07 and 0123.00 were published in November 2023. The first Compliant Products List for body armor tested to NIJ 0101.07 was released in June 2026. The transition is taking place in stages. Initial Type Testing for new NIJ 0101.06 armor models has ended. However, previously listed models remain covered under the existing program during the transition period. Under the NIJ's previously announced plan, the Compliant Products List for NIJ 0101.06 is expected to remain available until at least the end of 2029. 

For manufacturers and procurement professionals, it is important to identify the standard and revision specified for a particular project and verify whether the body armor model appears on the corresponding Compliant Products List. Official standards and published addenda are available from the National Institute of Justice. 

What Does NIJ 0101.07 Mean for Ceramic Armor Plates? 

Ceramic composite armor systems are frequently used in hard armor plates designed to address specified rifle and hardened-core projectile threats. The ceramic forms the hard front layer, known as the ceramic strike face. Upon impact, it fragments or erodes the hardened projectile core. The underlying fiber-reinforced composite backing captures the fragments and distributes the remaining kinetic energy. 

Schunk Technical Ceramics supplies Qitin® Armor Ceramics for these protective systems. 

For military body armor, Schunk offers Qitin® Classic, Performance, and Ultimate. For law enforcement applications, Qitin® Classic and Ultimate are the primary options. The ceramic components are integrated into the customer's complete armor system. NIJ compliance testing applies to the finished body armor model, not to an individual ceramic component. 

 

FAQ - Frequently Asked Questions About NIJ Standard 0101.07

What Is the Difference Between NIJ 0101.07 and NIJ 0123.00?

What Does NIJ RF2 Mean?

Does NIJ 0101.07 Apply to Ballistic Helmets?

Are Qitin® Armor Ceramics Certified to NIJ 0101.07?